We main manufacture automotive paint included
a) 2K topcoat in different solid colors
b) 1K basecoat in different solid colors, metallic colors ,silver and pearl colors
c) 2K standard / high solid clear coat ,hardener, thinner to make the surface more shiny:
d) 1k ,2k primer surface can be white,gray colour
e) 2K primer surfacer: the intermediate layer
f) epoxy primer/alloy primer: the bottom layer
g) plastic primer
can be tailor customer brand easily With superior good quality and competitive prices less 5% profits,
we are looking for local overseas distributors
Any interested enquiries are welcome to contact us.
RAP-20 1K Transparent Plastic Primer |
Characteristic: |
Characteristic: Volatile dry plastic primer, used to enhance adhesion between the paint film and the plastic substrate. |
Substrates |
Plastic substrates such as PP,PA,PVC |
Substrates Treatment |
use the degreaser to clean the substrate |
Mixing ratio |
Do not need to mix with other products, use directly |
Pot Life |
Volatile products, use immediately |
Spraying viscosity |
11±2S@25ºC |
No. of Coats |
2 Coats |
Drying time Time |
10-20 Minutes @20ºC |
Each Thickness |
About 5-10 Micron |
Spray pressure |
Gravity feed 1.2-1.5 Suction feed, 1.2-1.7,Spray pressure 3-4kg/cm² |
Sandability and Polishabiility |
on need to sand |
Shelf Life |
5 years in original sealed(can continue to use after passing inspection ) |
Packaging |
1LX12tins/ctn |
1K Primer surfacer |
Fast dry,easy sanding,one pack primer surfacer,easy to use,strong filling power,excellent coverage, good adhesion between layers, suitable to cover minor defects of the paint film. |
|
|
Substrate |
The dried and be polished old paint surface, or completely polished putty surface. |
Not suitable Substrate |
Aluminum, stainless steel, plastic, galvanized steel and timber |
Surface Cleaning |
Remove wax,silicon, and other contaminations with degreaser |
Mixing Ratio |
RAP 1K Primer Surfacer : Standard thinner=1: 0.8~1.0 |
(1: 0.8~1.0) |
No.of Coats |
2-3 coats,total 15--25um |
Interval time |
5-10 minutes, 25ºC |
Spray gun and pressure |
Gravity gun. (up pot) 1.4-1.6mm 3-5 kg/CM2 |
Siphon gun (down pot) 1.7-1.8mm 3-5 kg/CM2 |
Drying time |
30 minutes, 25ºC |
Sanding |
Dry sanding with 400#---600# sandpaper or wet sanding with 800#----1000# sandpaper |
Re-coat |
Could be re-coat all colors paint and plasticintermediate paint after dry and sanding. |
Shelf life |
Above 2 years in original sealed can in cool and dry place at 20ºC |
colours |
Grey in common,also have lightergrey, red,medium yellow,blue,green,black,white and egg yellow |
Packing |
4kg can |
Note: |
|
|
|
|
|
|
|
Not suitable for direct application over bare metals like the aluminum, stainless steel, plastic,
galvanized steel & wood surface. |
It is recommmended for small part repair but not for large area application. |
It is recommended to use 2K primer surfacer to achieve good adhesion and strong corrosion resistance. |