56 102 etc Heads Paint Mixing Machine for Tinting Center, Bodyshop & Garage.

• Customization: Available
• CAS No.: 2010830835
• Formula: 2K Solid Tinters
• EINECS: 208197723
• Color: White
• Appearance: Liquid
• Main Raw Material: Acrylic
• Paint Film Property: Insulating Varnish
• Method: Spray
• Level: Finish Coat
• Certification: ISO14001, ISO9001
• Substrate: Steel
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• 56 102 etc Heads Paint Mixing Machine: Popupar in Tinting Training Center and Auto Expres
• Packaging Details: Plywood Case
• Voltage: 110-240V
• Wholesale Price High Speed Mixer Paint S: Colorants Paint Tinting Machine
• Transport Package: by Carton
• Specification: 1L or 4L
• Trademark: rapicoat
• Origin: China, Guangzhou
• HS Code: 32018090
• Production Capacity: 32335

Product Description

2K solid color B series colorants paint tinting machine
2K senior two-pack solid color, with properties of hard paint film, high gloss and build with good resistance and hiding power. The color is bright and long lasting.
Substrates	Dried and sanded existing finishes or primer
Substrates treatment	Remove paint dust and contaminations with degreaser
Mixing Ratio	Name		2K Solid color		Hardener		Thinner
	Volume Ratio		100 parts		50parts		20-30parts
port life	4 hours@20degree
Spray viscosity	16-22 Seconds@20 degree
No. of Coats	2-3 coats
Flash-off time	10-15 Minutes
Each thickness	40-60 Micron
Spray Pressure	RP Gravity Feed1.2-1.4mm 2.0-2.5 bar      HVLP Gravity Feed  1.2-1.4mm 2.0 bar
Drying Time	Temperature		Dust Free		Dry to Handle		Thorough Dry
	24 hours@20 0C		30minutes		10hours		1day
	1 hours@600C		15minutes		1hours		1hour
Sandability and Polishabiility	wet sanding P800 P1000 sand paper if need polish.
Shelf Life	3 years in original sealed
Package	1LX12tins/ctn,4LX4tins/ctn
1.Remains of water in the sanding marks is harmful to the property of paint film. If the substrate is prepared with P800-P1000 wet, blow dry the surface with spary gun.
2.At temperature lower than 15ºC, air-dry at ambient temperature is not recommended. Allow a full bake at 60ºC.
3.At ambient temperature  higher than 30ºC, add Retarder Solvent into thinner to avoid blushing. Details please refer to the technical data sheet of Retarder Solvent.
4.In the event of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and  re-spray the affected area.
5.In the overspray area of new and existing finish, apply directly Thinner SRA to achieve an invisible transition. Details please refer to the technical data sheet of Thinner SRA.
6.The products mixed with hardener should be used up soon and can not restore for future use.
7.Clean equipments immediately with solvent after application.